DuraVent - DuraTech 10" -24", Chimney Pipe
10” - 24” Diameters - Designed for appliances that are tested and listed for use with a 1700°F rated chimney system, such as zero-clearance or masonry fireplaces, furnaces, boilers, water heaters, ranges, or other appliances fueled by oil, coal, gas, or wood. Tested to UL 103 and listed under MH 7399. Available in galvalume (GA) and stainless steel (SS) outer wall and stainless steel inner wall. Requires fastening with screws. DuraTech (10”-16” diameters) 24” and 36” chimney pipe is available with additional protective carton filler for shipping. Available items have stock numbers with (CF). 18”-24” diameters are built to order and are not returnable.
- Available inner diameter : 10" - 24"
- Available pipe length : 6" - 36"
- Available finish material : Galvalume, Stainless steel & Stainless steel with carton filler.
- Ring ends thickness 1"
- Designed for Use with Appliances Fueled by Wood, Oil, Coal, or Gas
- UL Listed
To calculate installed length of 10”, 12”, 14”, 16”, 18”, 20”, 22” or 24” DuraTech Chimney, subtract 1” from each joint overlap of chimney pipe. Important: Allow a minimum of 2” air space to combustibles when installing DuraTech Chimney.
Materials and Construction
10″-24″ diameter pipe feature .027″ 430 stainless steel inner wall and outer wall of .029″ galvalume or .027″ 430 stainless steel. A Thermal Tech (ceramic refractory) blanket insulation is encased between walls. Stainless steel end rings seal the pipe.
c-UL-us Listed to UL 103 and ULC S604
Typical Installation(Refer this if any required)
Refer to our Typical Installation drawings to select the required component parts for your installation.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.