DuraVent - DirectVent Pro 4X6&5X8 Sconce Counter Flashing
Introducing the DuraVent DirectVent Pro 4X6&5X8 Sconce Counter Flashing, the perfect accessory to ensure a secure and professional installation of your DirectVent Pro chimney system. Designed with precision and durability in mind, this counter flashing provides a seamless and weather-tight seal, giving you peace of mind and confidence in the performance of your venting system.
Crafted from high-quality materials, the DuraVent DirectVent Pro Sconce Counter Flashing is built to withstand the harshest weather conditions and the test of time. Its rugged construction guarantees long-lasting protection against rain, snow, and other elements, ensuring the integrity of your chimney system for years to come.
The innovative design of the counter flashing allows for easy installation, saving you time and effort. It seamlessly integrates with your DirectVent Pro 4X6&5X8 chimney system, providing a secure fit and preventing any potential leaks. The sleek and low-profile appearance enhances the aesthetics of your home, adding a touch of elegance to your exterior while effectively safeguarding your chimney.
Not only does the DuraVent DirectVent Pro Sconce Counter Flashing offer outstanding performance and durability, but it is also engineered with safety in mind. It meets and exceeds the highest industry standards, guaranteeing reliable and efficient operation. This counter flashing is designed to create a tight seal around the chimney penetration, effectively preventing any gas leaks and maintaining optimal ventilation.
Whether you are a homeowner, a professional installer, or a contractor, the DuraVent DirectVent Pro 4X6&5X8 Sconce Counter Flashing is the ideal choice for your venting needs. With its superior quality, easy installation, and excellent performance, this counter flashing ensures a hassle-free and reliable chimney system, providing you with warmth, comfort, and peace of mind.
Typical Installations(Refer this if required):
Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.
Planning Your Installation:
|1||For vertical gas stove installations, measure the height from the stove outlet to the ceiling to determine the length of black pipe required. Select a ceiling support/wall thimble cover or a cathedral ceiling support box.|
|2||To determine the length of galvanized pipe required, measure the ceiling thickness and the vertical rise in an attic or second story. Firestops are required at each floor level beyond the first floor ceiling support/wall thimble cover or cathedral ceiling support box. If an offset is required to avoid obstructions, use a pair of 45° elbows. For proper support, use elbow straps with offsets. Use wall straps for long vertical runs. Attic Insulation Shield is required in attic.|
|3||Measure the roof pitch. Select the proper flashing and storm collar. Determine the minimum height above the roof.|
|4||For horizontal installations, check the appliance manufacturer’s instructions for minimum rise and maximum horizontal run. A snorkel termination may be used if height restrictions prevent adequate rise above the appliance. Select the appropriate Horizontal Termination Cap (see appliance manufacturer installation instructions). To protect vinyl siding, select vinyl siding standoff. Check appliance manufacturer’s instructions for wall thimble and firestop requirements.|
- The following design recommendations are general guideline to assist in the design and selection of venting components for your installation. Always follow DuraVent Installation instructions enclosed with the cap or support box before installing your chimney system. Installation instructions can be viewed online at www.duravent.com, under Catalogs and Instructions. Important: Check the manufacturer’s rating plate and instruction manual to confirm that the DuraVent direct vent system is approved for use on the brand name appliance you have selected.
- The inner and outer pipe diameters should match the outlet size of the appliance.
- Check the appliance manufacturer’s installation instructions to confirm which types of vent configurations are permitted (i.e. horizontal, vertical, chimney reline, etc.). Also, check for any venting restrictions such as maximum horizontal run, minimum and maximum vertical rise, maximum offset, etc.
- Be fire safe! Maintain at least the minimum clearances (air-space) between the vent pipe and nearby combustibles, as specified in the appliance manufacturer’s installation instructions. Use proper support and bracing. Follow local building codes and have your venting system inspected.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.