Skip to content

DuraVent - DirectVent Pro 4"x6" Diameter Copper & Stainless Steel Vinyl Sliding Standoff Kit-Small

SKU 46DVA-VSKS-SS
Original price $94.38
Original price $94.38 - Original price $453.65
Original price $94.38
Current price $84.94
$84.94 - $289.69
Current price $84.94
+ FREE SHIPPING | Ships in 1-7 Business Days | No Sales Tax! Exclusions Apply | Found it lower?

Need help? Our professionals are available to assist you.
Mon-Sun: 5AM-5PM PST
Description

DuraVent - DirectVent Pro 4"x6" Diameter Copper & Stainless Steel Vinyl Sliding Standoff Kit-Small

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not imbedded in the siding. Kit includes 4-pieces; sized for Sconce Cap, Round Horizontal Cap and H2 Horizontal Cap only. Stainless steel (SS) and Copper (C) available. Use for 4”x 6 5⁄8” and 5”x 8” diameters.

Specifications

  • Kit Includes: 4-Pieces of Vinyl Siding
  • Material: Stainless Steel
  • Length: 12-7/8"
  • Width: 3"
  • Use as a Heat Shield on Structures with Vinyl Siding or other Temperature Sensitive Materials
  • Only for Horizontal Terminations or Any Irregular Surface Siding
  • Sized for Sconce Cap and Round Horizontal Cap Only

Typical Installations(Refer this if required):

Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.

Top

Planning Your Installation:

1 For vertical gas stove installations, measure the height from the stove outlet to the ceiling to determine the length of black pipe required. Select a ceiling support/wall thimble cover or a cathedral ceiling support box.
2 To determine the length of galvanized pipe required, measure the ceiling thickness and the vertical rise in an attic or second story. Firestops are required at each floor level beyond the first floor ceiling support/wall thimble cover or cathedral ceiling support box. If an offset is required to avoid obstructions, use a pair of 45° elbows. For proper support, use elbow straps with offsets. Use wall straps for long vertical runs. Attic Insulation Shield is required in attic.
3 Measure the roof pitch. Select the proper flashing and storm collar. Determine the minimum height above the roof.
4 For horizontal installations, check the appliance manufacturer’s instructions for minimum rise and maximum horizontal run. A snorkel termination may be used if height restrictions prevent adequate rise above the appliance. Select the appropriate Horizontal Termination Cap (see appliance manufacturer installation instructions). To protect vinyl siding, select vinyl siding standoff. Check appliance manufacturer’s instructions for wall thimble and firestop requirements.

Design Recommendations

  • The following design recommendations are general guideline to assist in the design and selection of venting components for your installation. Always follow DuraVent Installation instructions enclosed with the cap or support box before installing your chimney system. Installation instructions can be viewed online at www.duravent.com, under Catalogs and Instructions. Important: Check the manufacturer’s rating plate and instruction manual to confirm that the DuraVent direct vent system is approved for use on the brand name appliance you have selected.
  • The inner and outer pipe diameters should match the outlet size of the appliance.
  • Check the appliance manufacturer’s installation instructions to confirm which types of vent configurations are permitted (i.e. horizontal, vertical, chimney reline, etc.). Also, check for any venting restrictions such as maximum horizontal run, minimum and maximum vertical rise, maximum offset, etc.
  • Be fire safe! Maintain at least the minimum clearances (air-space) between the vent pipe and nearby combustibles, as specified in the appliance manufacturer’s installation instructions. Use proper support and bracing. Follow local building codes and have your venting system inspected.

 

 

 

Product Reviews

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question